YS/T 273.2-2006 冰晶石化学分析方法和物理性能测定方法 第2部分: 灼烧减量的测定

作者:标准资料网 时间:2024-05-29 22:50:40   浏览:8404   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:冰晶石化学分析方法和物理性能测定方法 第2部分: 灼烧减量的测定
英文名称:Chemical analysis methods and physical properties of cryolite—Part 2:Determination of ignition loss
中标分类: 冶金 >> 金属理化性能试验方法 >> 金属物理性能试验方法
ICS分类: 化工技术 >> 化工产品 >> 铝生产用材料
替代情况:替代YS/T 273.2-1994
发布部门:中华人民共和国国家发展和改革委员会
发布日期:2006-05-25
实施日期:2006-12-01
首发日期:1900-01-01
作废日期:1900-01-01
主管部门:国家发展和改革委员会
提出单位:全国有色金属标委会
归口单位:全国有色金属标委会
起草单位:抚顺铝厂、中国有色金属工业标准计量质量研究所
起草人:薛旭金、施秀结、侯利红、郭贤慧
出版社:中国标准出版社
出版日期:2006-07-28
页数:平装16 开, 页数:8, 字数:6
书号:155066.2-17127
适用范围

本部分规定了冰晶石烧减量的测定方法。本部分适用于冰晶石烧减量的测定。测定范围:≤6.00%。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 冶金 金属理化性能试验方法 金属物理性能试验方法 化工技术 化工产品 铝生产用材料
下载地址: 点击此处下载
【英文标准名称】:Ironorepelletsforshaftdirect-reductionfeedstocks-Determinationoftheclusteringindex
【原文标准名称】:高炉直接还原给料用铁矿石球团.成团指数的测定
【标准号】:ISO11256-2007
【标准状态】:现行
【国别】:国际
【发布日期】:2007-10
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC102
【标准类型】:()
【标准水平】:()
【中文主题词】:定义;测定;直接还原炉;铁矿石;金属矿;矿物;金属矿物;球状材料;物理化学法;还原;还原炉;测试
【英文主题词】:Definitions;Determination;Directreductionkiln;Ironores;Metalliferousminerals;Minerals;Ores;Pellets;Physico-chemicalmethods;Reduction;Reductionfurnaces;Testing
【摘要】:ThisInternationalStandardspecifiesamethodtoprovidearelativemeasureforevaluatingtheformationofclustersofironorepelletswhenreducedunderconditionsresemblingthoseprevailinginshaftdirect-reductionprocesses.ThisInternationalStandardisapplicabletohot-bondedpellets.
【中国标准分类号】:D31
【国际标准分类号】:73_060_10
【页数】:13P.;A4
【正文语种】:英语


【英文标准名称】:Gasweldingequipment-Air-aspiratedhandblowpipes-Specificationsandtests
【原文标准名称】:电焊装置.手工吸气焊炬.规范和试验
【标准号】:BSEN731-1996
【标准状态】:作废
【国别】:英国
【发布日期】:1996-01-15
【实施或试行日期】:1996-01-15
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:性能;设计;热切割设备;防火安全;使用说明;性能试验;硬钎焊设备;软钎焊设备;流量测量;试验条件;温升;作标记;热试验;人力驱动装置;代码;试验压力;焊接设备;气焊设备;焊枪
【英文主题词】:Blowpipes;Brazing;Burners;Definition;Definitions;Gaswelding;Gas-weldingequipment;Manualblowpipes;Manually-operateddevices;Marking;Oxygencutting;Productspecification;Soldering;Specification(approval);Specifications;Technicaldocuments;Testing;Tests;Welding;Weldingequipment
【摘要】:ThisEuropeanStandardspecifiestherequirementsandtestmethodsforair-aspiratedhandblowpipes.ThisEuropeanStandardappliestoblowpipesforbrazing,soldering,heating,fusionandotheralliedthermalprocesses,whichuseafuelgasandaspiratedair(injector-typeblowpipes),andareintendedformanualuse.Thisstandardisapplicableto:-air-aspiratedhandblowpipeswhicharefedwithafuelgasinthegaseousphase,atacontrolledpressurebyaregulator,throughagassupplyhose;-air-aspiratedhandblowpipeswhicharefedwithaliquefiedfuelgasinthegaseousphaseatthecontainerpressure,throughagassupplyhose;-so-calledliquid-phaseblowpipeswhicharefedwithafuelgasintheliquidphase,andwherethermalevaporationtakesplacewithintheblowpipe.Itdoesnotapplytoblowpipesinwhichthefuelgasleavestheinjectorintheliquidphase,ortoso-called'cartridge'blowpipeswherethegassupplyisfixeddirectlyontotheblowpipeandpossiblyconstitutestheshank.NOTE.ThedrawingsshowninthisEuropeanStandardaregivenforinformationonly,tofacilitatetheexplanationoftheterms.Theydonotspecifytheconstructiondetailswhicharelefttothediscretionofthemanufacturer.
【中国标准分类号】:J64
【国际标准分类号】:25_160_30
【页数】:16P.;A4
【正文语种】:英语